Contents |
If a stain has "set", it has become chemically bonded to the material that it has stained, and cannot be removed without damaging the material itself. It is therefore important to avoid setting stains that one wants to remove. This can be done by avoiding heat (by not pressing or ironing the stain), sponging stained materials as quickly as possible, using the correct solvent (some solvents will act as catalysts on certain substances and cause the stain to set more quickly), and avoiding rubbing the stain.[1]
Most stains are removed by dissolving them with a solvent. The solvent to use depends from two factors: the agent that is causing the stain, and the material that has been stained. Different solvents will dissolve different stains, and the application of some solvents is limited by the fact that they not only dissolve the stain, but also dissolve the material that is stained as well.[1]
Another factor in stain removal is the fact that stains can sometimes comprise two separate staining agents, which require separate forms of removal. A machine oil stain could also contain traces of metal, for example.[1]
Also of concern is the colour of the material that is stained. Some stain removal agents will not only dissolve the stain, but will dissolve the dye that is used to colour the material.[1]
These are some of the solvents that can be used for stains, with some examples of the stains that they are capable of removing:[2][3]
Household bleach generally removes a stain's colour, without dissolving the stain itself. Hydrogen peroxide is also a bleaching agent that can be used to treat stains.[2]
Acetone is good for removing some glues, nail polish, rubber cement, and grease. Nail polish remover may contain acetone, however for general use it is best to obtain bottled acetone from a hardware store. It can be diluted with water.[2][3]
Lemon juice, containing citric acid, is a bleaching agent. Its action can be accelerated by exposing the stain to sunlight whilst it is saturated with the juice.[2] Various Acids were used in the past such as Phosphoric acid in Calcium Lime Rust Remover (CLR) and Hydrofluoric acid used in an Australian Product made in Queensland called "Rustiban". Both of these Acids have been removed from sale to the general public due to toxicity concerns.Both of these Acids were used primarily to remove Rust. Other Rust removal Acids are Oxalic Acid. See also Borax or Boric Acid, Vinegar ( or Acetic Acid ) which can also help bring out stains.
Sodium Hydroxide Is also commonly used in drain cleaners. It allows Grease and oil to remain in suspension within an Aqueous solution. i.e. Water. Other Alkali such as Potassium Hydroxide (much stronger than Sodium Hydroxide ) is also used. Both of these are dangerous chemicals and react with human flesh causing hideous chemical burns. See also Cloudy Ammonia / Ammonia
There are four ways to apply a solvent to a fabric for removing stains:[1]
Hair coloring products are commonly used to cover gray, look more attractive of keep up with fashion, yet they pose a challenge for many women. Because of the length of time the hair dye must be on the hair to achieve deep, even results, it often seeps or drips down onto the hairline, ears or neck, causing unsightly and irritating stains on the skin. Dye users are not universally affected—some persons have a tendency to get stains while others do not—most likely due to the variations in lipid or natural oil composition on the skin surface from one person to the next.[4]
Many salons and stylists advocate the use of petroleum jelly to prevent stains. Placing a rim of petroleum jelly around the hairline creates a physical barrier to prevent the dye from running down onto the skin of the forehead and neck, and fills the pits and recesses within the epidermal layer.
Human hair is composed largely of keratin protein, which has a negative ionic charge, giving hair a negative ionic charge as well.[5] As chemistry dictates, oppositely charged compounds attract and compounds with the same charge repel each other. Most hair dyes are positively charged, helping them attach to the negative sites in hair and contributing to a better bond between the dye and the hair.
Unfortunately, like hair, human skin is made of keratin and contains sites with a negative charge, and therefore, it also attracts the dye. Skin also has pores and other pits and recesses which allow dye to get physically trapped in the epidermal layer. These both contribute to the development of stains on the skin.
The dye itself can be directly absorbed through the skin and into the bloodstream.[6] The stratum corneum (the outermost layer of skin also called the “horny layer”) contains a “lipid domain” that allows the dye to pool and provide opportunity to diffuse into the body.[6] Some hair dyes can also irritate the skin with prolonged exposures. As a result, quickly removing or minimizing skin exposure to dye is often considered desirable.
While many home remedies exist to attempt to remove the stains from skin, there are very few products distributed in traditional drugstore or discount channels for this purpose. The home remedies vary in effectiveness and carry the risk of skin irritation and abrasion as a result of excessive scrubbing, plus eye irritation if allowed to drip or run into the eye. Some of the more common home remedies include: bleach, ammonia, acetone, and rubbing alcohol.
The following are risks of the common removal methods: